.

Wednesday, September 25, 2019

Ethics in the Engineering Profession Assignment

Ethics in the Engineering Profession - Assignment Example Thereafter, the consequences of the choices and decisions made in the situation are reviewed, and finally an analysis of the impact the code of ethics on the conduct of engineering professionals is discussed. A facility was needed to store water in a reservoir. The water to be stored was to be drawn from the reservoir by a separate system. The required system was expected to manage the level of water in the storage reservoir. The engineers in the situation used digital signals in which the PLC had two digital inputs, that is, empty reservoir and full reservoir. The digital output of the PLC is used to open and lock the inlet into the reservoir. When the two switches are off, the PLC opens the valve to let in more water. In the event that both switches are on, the PLC by design shuts the inlet to prevent overflow. Float switches were used to avert a situation in which any use of water opens the valve or activates, and subsequently deactivates the pump for a stint, making the system wear down quickly. The analog approach may use water and a valve, which can be adjusted. As for the PLC, a PID reaction loop could be used to regulate the opening of the valve. The engineers tasked with this duty were not getting on well and hence had challenges in communicating to one another; therefore, their ultimate goal lacked objectivity. The system they designed did not optimize the refill rates because one engineer failed to advise the counterpart that using both options of analog and digital system would be the best option to the problem. They ended up using the digital system. The two engineering professionals failed to effectively communicate; hence, performed the activity with dishonesty and without objectivity. The solution they offered the client will cause economic loss since the refill rates were not optimized even though it was possible for the two to ensure it happened. Clearly, the engineering code of ethics three was violated as objectivity and

No comments:

Post a Comment